Dart production is mainly concentrated in the UK, the United States, Germany, Australia and China (including Taiwan, China). The styles and materials of the darts flights tray are various, and the size and partition settings of the tray are also different. International dart competitions have strict regulations on the specifications, dimensions and hanging distance of darts shafts boards.
How high is the dart board?
(1) The dart tray shall be fixed and hung on the wall perpendicular to the ground, and the height from the center of the red center to the ground is 1.73 meters. The dark 20 zone shall be located at the top of the middle.
(2) The throwing distance is 2.37M from the ground to the extension line of the dart board plane, and the diagonal length from the center point of the double red center to the center point of the throwing line is about 2.93M.
Hemp dart board: Hemp darts board is the most popular and best quality dart board in modern times. It is also the designated board for various formal competitions. The dart board is made of hemp fiber. The high-grade hemp darts produced in Britain are made of sisal from Africa (mainly Kenya). Most of the raw materials of darts produced in China come from Hainan Island, so many people are used to calling hemp darts as Qiongma darts. The production of hemp darts is more complex than other darts. The fiber shall be extruded with a pressure of more than 10 tons, and then the outer ring shall be fixed with an iron hoop. Therefore, the hardness of a good hemp dart tray is moderate. After the dart is pulled out of the tray, the dart hole will automatically close, making its service life much higher than that of other darts.
Specifications and dimensions of dart tray
Dart tray diameter: 453.0 (± 3.0) mm.
Digital ring diameter: 436 mm; Wire diameter 2 mm.
Diameter of separating mesh ring: 335mm; Wire diameter 1 mm.
Dart plate thickness: 38mm
Diameter of outer center circle: 31.8mm.
Diameter of inner center circle: 12.7 mm.
Double zone top arc width: 55mm; The width of double zone and triple zone is 8mm.
Bottom arc width: 50mm.
Triple zone top arc width: 35mm.
Bottom arc width: 30mm.
Height of upper score area: 55mm.
Height of lower score area: 80mm.
Arc width of bottom edge of score area: 5mm.
留言列表
