A small dart seems simple, but it actually contains great wisdom. In the process of actual combat, there are many rules and skills.
Which part of the dart gets the highest score when it hits the dart target? First of all, we need to understand that the dart target for darts has 20 zones. The 20th zone should be directly above the dart board (the position of the real-time clock at 12 o'clock) and be black, while the other score areas are cross divided into black and white from 20 o'clock, clockwise into 1, 18, 4, 13, 6, 10, 15, 2, 17, 3, 19, 7, 16, 8, 11, 14, 9, 12 5 points. From the outer ring to the bull's-eye, the dart target can be divided into score area, double area, triple area, outer center circle and inner center circle. The score area is the score area of the calibration score of the outer ring of the dart tray, the double area is the narrow ring of the outer ring of the dart tray, which is twice the score area, and the triple area is the narrow ring of the inner ring of the dart tray, which is three times the score area. In addition, the outer center circle (green) is 25 points and the inner center circle (red) is 50 points. "From the structure of the dart target, we can see that the central bull's-eye score is 50 points, but the triple area within the 20 point area can get 60 points. Therefore, the triple area of 20 points is the area with the highest single dart score on the whole dart target.darts for sale
At the same time, in the process of dart competition, not only hands but also brains. For example, in the preliminary round, the score is higher than who throws. Generally, it is 8 rounds, with three darts in one round and 24 times. The score is accumulated. Who has a higher score will win. The 501 point rule is used in the semi-finals. The so-called 501 point rule means that before the start of the game, the basic scores of both sides of the game are 501 points, and then the game is played in an inverted way. The three darts are a round. After the round is over, the score of the round is deducted from the 501 points, and then the two sides go to the next round, and the one who is deducted to zero points first is the winner. The end dart must be in the double area with half of the remaining scores. After throwing darts, when the score of three darts or any one of the three darts exceeds the remaining score or there is only one point left, it will be regarded as explosive darts, and its score will still be the score before throwing darts. "This requires that playing darts requires not only hands, but also athletes' brains." In the last few darts, the athlete needs to calculate the score. "For example, when you have 15 points left, you have to calculate well. The score of this dart must be odd. If you get an even number, for example, if this dart gets 6 points, then your remaining score is 9. It is impossible for you to end this dart, because according to the requirements of ending dart, you must throw in the double area of half of the remaining score, and there is no 4.5 point on the dart target A range. "best darts online
Another point is that a novice dart can even beat an "old hand". Compared with ordinary sports, darts are very accidental. Many beginners also have the opportunity to win professional players, which will give beginners great confidence and make beginners willing to participate.darts

dkeidneb123 發表在 痞客邦 留言(0) 人氣()

Generally speaking, tungsten alloy darts are made of 80-95% tungsten and tungsten alloys with different components of adhesives (nickel, copper, iron).
Due to technical problems, it is impossible to manufacture 100% tungsten darts. In fact, the tungsten darts available on the market are all tungsten alloy darts, and the composition of tungsten alloy darts on the market is very obvious. So usually 80% tungsten alloy darts refer to 80% tungsten and 20% nickel, copper or iron. The tungsten content of tungsten alloy darts is usually 80% to 90%. The higher the content of tungsten, the finer the dart and the more expensive it is. Personally, 80% tungsten is the best for most people.darts
The higher the content of tungsten, such as 98% tungsten, the greater the density, and the less easy it is to wear the surface of the dart. However, the higher the tungsten content, the more brittle it is. If it is accidentally dropped on a hard surface, it will break.Tungsten Darts
To avoid these problems, most tungsten alloy darts are being made of a mixture of tungsten ranging from 70% to 95%. Lower density tungsten darts are much cheaper because they are easier to machine. Tungsten alloy darts with lower density are also relatively wear-resistant, not easy to break, corrosion-resistant, saline alkali resistant, etc.
In leagues and championships, players usually choose to use 90% tungsten hard darts. Soft darts are usually made of 80% tungsten, with lower density, cheaper price and less easy to break. Soft darts bounce easily, and electronic devices are placed on many floors. 80% tungsten soft darts usually fall on the floor and are not easy to break. Hard darts are easy to break, which is a serious problem, so when playing hard darts, you usually have to put a blanket on the floor.steel tip darts

dkeidneb123 發表在 痞客邦 留言(0) 人氣()

O1CN01gMHZLk1SqWrNbHtrS__2201502298-0-cib_540x.jpg

 
Dart target and dart quality and price factors
1. The quality of dart target can be judged according to the following points:
(1) Whether the target surface pattern is clear, whether the color registration is accurate and whether the color is uniform.
(2) Whether the target ring and digital ring are standardized.darts shafts
(3) Whether the front and back sides are flat and stable after installation.
(4) Whether the zones from 1 to 20 are evenly distributed on the target disk according to 180.
(5) Whether the dart target is hard and not easy to deform and degumm after use.
(6) The disk surface of flocking target disk is soft and free of cracks.darts flights
(7) Whether the puncture of hemp target disc will heal by itself after dart removal.
(8) In addition to the above, the quality of dart target also depends on the color purity, fineness and flexibility of hemp raw materials.
(9) The reference specifications of dart target are as follows:
Dart target thickness: 38mm; Dart tray diameter: 458mm; Diameter of digital ring: 436mm (including steel wire); Diameter of outer ring of separation net: 335mm; Diameter of outer circle center: 40mm; Diameter of inner circle center: 15mm; Double outer arc width: 54mm; Double inner arc width: 50mm; Double zone height: 10mm; Outer arc width of triple zone: 34mm; Triple arc width: 30mm; Height of triple zone: 10mm; Height of scoring area outside the single fold area: 54mm; Height of score area in single fold area: 80mm.darts accessories

dkeidneb123 發表在 痞客邦 留言(0) 人氣()

Tungsten alloy hard dart tip and soft dart tip are obviously different in weight, dart tip and price.
1. Weight
Tungsten alloy dart hard dart tip can weigh up to 50g, but it is difficult to find many kinds of more than 30g. Most people throw darts that weigh between 20 and 25 grams.
Tungsten alloy dart soft dart tip is different: you need to verify the weight requirements of the local alliance. The 16 gram dart seems to be 100% safe wherever it is thrown. You can have heavier darts, but some leagues and games may be banned due to restrictions on the machines you are building or using. If your opponent thinks the dart is too heavy, you can challenge the weight of your dart.darts shafts
2. Dart tip
Hard dart tip: you have two choices, fixed dart tip or indefinite dart tip.
Fixed dart tip: it means that the dart tip is firmly fixed on the dart and cannot be moved. This is one of your most common darts.
Uncertain dart tips: guess what, these dart tips are moving. There are many different types on the market, but the theme behind them is the same, "help reduce pop-up rate". When throwing darts, you want the dart tip to be fully unfolded, so that if you hit the iron wire, the back end (or tube) will move forward to push the dart tip into the board, rather than letting the dart drop off the iron wire and fall to the ground.darts flights
3. Price
One of the biggest misconceptions of new throwers is that if darts are more expensive, they are more accurate. It's not like a car. It's more cost-effective. If there's nothing better than a $140 tungsten dart, you can also choose an 18 gram brass dart for about $10. The price is based on a certain number of items, such as the material of darts, uncertain dart tips, special painters, etc. Similarly, you will notice that the same set of darts may have two different prices in some catalogues.darts shafts

dkeidneb123 發表在 痞客邦 留言(0) 人氣()

Stand steadily. Some people can't help leaning forward or backward, but this posture is not as stable as standing upright. Right handed people, with their right foot in front and left foot behind, put their weight on their right foot, but don't lean too forward. Don't lean your left foot forward, but don't lean your left foot too far back. Keep your feet firmly on the ground. When throwing darts, the body must keep balance, otherwise, the hand will unconsciously exert tension and thrust on the magnetic dart, and the dart will deviate from the original direction.best darts online
Pay attention to the posture of holding darts. Put the dart in the palm of your dominant hand, and then weigh it to find the center of gravity of the dart. Press your thumb at the back of the center of gravity, and then hold the dart with two or four fingers. How many fingers you use depends on how you get used to it. The head of the dart should be tilted up a little, and then move back and forth as straight as possible. Any other movement of flower ball and beautiful legs will only make the dart deviate from the direction. Throw darts gently. Throwing darts cannot be too hard. Throwing darts hard is unnecessary and dangerous. In fact, the force required to stick the dart on the dart board is very small, so you don't have to use too much force.darts for sale
Remember, the purpose of this game is to calculate the score, not to compare who has the greatest strength.darts

dkeidneb123 發表在 痞客邦 留言(0) 人氣()

Dart target, also known as dart board. Dart targets have various styles and materials, and their sizes and zoning settings are also different. The dart target for standard competition has a double ring outer diameter of 342mm and a total diameter of 457mm. Dart targets designated in regular competitions are generally hemp. Hemp dart tray is the most popular and best quality dart tray in modern times. The dart board is made of hemp fiber. The high-grade hemp darts produced in Britain are made of sisal from Africa (mainly Kenya). The raw materials of darts produced in China mostly come from Hainan Island, so many people are used to calling hemp darts as Qiongma darts. The hardness of a good hemp dart tray is moderate. After the dart is pulled out of the tray, the dart hole will be closed automatically, so that its service life is much longer than that of other dart trays.electronic darts
The dart targets made of different materials have different maintenance methods. Among them, the maintenance of wooden dart targets is more troublesome. The most exquisite of all DART targets is wood. Generally, it is necessary to take a bubble every night to prevent dry crack and deformation. The hanging point of regular hemp dart tray is in the center of the dart tray, and its digital circle can also be adjusted. After playing for a period of time (usually one week), the dart board should be rotated and should not be fixed in a partition for a long time. There is a wrong saying that hemp darts should always be drenched with water. This is a mistake to follow the maintenance method of wooden darts, which is not applied to hemp darts at all. This will make your plate hard and eventually bulge into a pot cover shape. Sometimes, when the dart tip is stuck on the iron wire or knocked on the ground, it will produce some barbs. Be sure to grind off the barbs in time to prevent the fiber of the dart plate from being hooked out when pulling the dart. As long as the dart target is properly maintained, it can be reused for a long time.best soft tip darts
The dart target used in the standard competition is hemp dart plate, while the dart uses tungsten alloy dart. If dart lovers can practice according to the formal competition equipment in their daily training, they can reach the professional level faster.soft tip darts

dkeidneb123 發表在 痞客邦 留言(0) 人氣()

Take the tungsten alloy dart practice most commonly used by professional players as an example to introduce you to practice the standard movements of darts. Generally speaking, there are three basic postures when throwing darts. One is that the toes are forward, the body is required to be upright, the feet are close together, and the toes are at right angles to the throwing line; The other is that the toes are parallel or at right angles. This is the most common posture. The toes of both feet face the throwing line; The third is one foot in front. This method is most suitable for beginners. When standing, the right foot is in front, and the ultimate principle is to stand comfortably.best darts online
The shoulders, elbows and wrists should be perfectly matched:
Keep your shoulders still while throwing.
Elbow: in the early stage of the throwing action, that is, when the arm is thrown back, the elbow should basically remain motionless. At a certain point in the acceleration process of waving a dart in front of the arm, the elbow will rise with the trend. After the dart, the hand should continue to follow the original direction of aiming at the target. Never drop the arm immediately after the dart. To ensure the flight route after the dart is released.darts store
Wrist: wrist Kung Fu needs to be honed most, because throwing wrist force can undoubtedly improve speed, but it is also easier to make mistakes.
Throwing process
Aiming: the same as shooting, eyes, darts and targets are aligned at three points.
Move back: this step should be moved, but not too fast. Beginners are often afraid that moving backward will lose the collimation, but if they don't move backward, only one percent of people can become masters.
Acceleration: this process is not as difficult as expected. Don't move too fast or too hard. Try to move naturally and smoothly. Remember to lift your elbow appropriately along a certain parabola direction. If you want to shake your wrist, you should also follow the original curve direction until the dart is out of hand.
Release: if you do the above points, this is easier. If you feel that you don't master the release points well, look for problems from the front.
Secret of holding Darts
Put the dart on the palm edge and find its center of gravity. Then push the dart to the tip of four fingers with your thumb, put your thumb a little behind the center of gravity, and finally grasp it with the rest of your fingers. In addition, the dart barrel has different shapes. You should not only find your own dart holding method, but also find your own dart barrel shape.darts supplies

dkeidneb123 發表在 痞客邦 留言(0) 人氣()

Darts can be divided into hard darts and soft darts. Hard darts are popular among the public and the most traditional darts in the dart movement. The biggest difference between hard darts and soft darts lies in the difference of dart tips. The dart tips of hard darts are usually made of steel, which can be divided into movable dart tips and immovable dart tips. The dart boards used in hard darts usually include wooden dart boards, paper dart boards or hemp dart boards, among which hemp dart boards are most used. According to different materials, hard darts can be divided into hard tungsten alloy darts shafts, hard copper darts, hard tungsten copper darts, etc. most of the professional hard darts used in the competition are tungsten alloy darts.darts flights
The hard darts used in the competition must have the basic structure of darts, namely dart body, dart needle, dart rod and dart wing. Its size and length shall not exceed 30cm, and its total weight shall not exceed 40g. Among them, the most widely used hard tungsten alloy dart is made of tungsten alloy. According to the unique material characteristics, the tungsten alloy dart rod gives full play to its excellent performance. Because the density of tungsten alloy is relatively high, the dart barrel made of tungsten alloy dart rod is thinner under the condition of the same weight. The higher the content of tungsten, the finer the dart. The advantage of hard tungsten alloy darts is that under the same weight, the volume of tungsten alloy darts with a lower proportion is much smaller, which improves the possibility of throwing darts in the same high zone and is less likely to be shot down. The hard tungsten alloy dart has small relative air resistance, good linear performance, stable flight, good throwing "feel" and more accurate use. It also has good corrosion resistance, and the sweat left during the use of the dart will not cause abrasion to the tungsten alloy dart. Because of the high hardness characteristics of hard tungsten alloy darts, compared with brass, stainless steel and other materials, hard tungsten alloy darts are not easy to deform. They have the advantages of large weight, small volume, corrosion resistance, oxidation resistance, durability and environmental protection. There is no doubt that they are the first choice of the hottest products in dart professional competitions.darts accessories

dkeidneb123 發表在 痞客邦 留言(0) 人氣()

How many kinds of darts are there?
According to the texture of darts, they are divided into hard darts and soft darts. The weight of soft darts generally ranges from 8g to more than 20g. The main difference between soft darts and hard darts is that the tip of soft darts is made of nylon and plastic, while the tip of hard darts is made of steel.
According to the shape, it can be divided into barrel type, torpedo type and straight barrel type. At present, many famous darters choose straight barrel darts, because it is suitable for all kinds of holding and throwing methods, which is easier to master.darts shafts
Darts can be made of many different materials. In the early days, darts were made of wood. After a period of time, they were mainly made of brass. Now, the three main materials of darts are tungsten, nickel and silver. According to different materials, darts can be divided into brass darts, nickel silver darts, tungsten alloy darts, etc.
The weight and performance of darts made of different materials are very different:
(1) Wooden darts: the body of the dart is usually made of cork, and the tail of the dart is feather. It is the most primitive dart. At present, there are a small number of manufacturers producing it, which has become the object of dart fans' collection.darts accessories
(2) Brass dart: its weight is light and cheap. Its weight is between 12g-22g. It is mostly used by beginners and children.
(3) Nickel silver dart: This is another kind of dart with lighter weight. It is made of alloy composed of nickel, copper and zinc. It is silver white, easy to produce and cheap.
(4) Tungsten alloy dart: it is made of tungsten nickel alloy, and the alloy proportion ranges from 70% - 97%. Tungsten alloy darts have heavy weight, high density, good aerodynamic effect, durability and high processing difficulty. Their price is often several times or even more than ten times that of the above two darts. Because the volume (thickness) of tungsten alloy darts with the same weight is much smaller than that of other darts, which improves the possibility of throwing darts in the same high zone. Most professional players use tungsten darts.darts flights

dkeidneb123 發表在 痞客邦 留言(0) 人氣()

Dart maintenance and cleaning:
1、 Maintenance:
Dart sports have low requirements for venues and cheap equipment prices. If properly maintained, a set of tungsten alloy darts can be used for many years. Dart maintenance is relatively simple and does not require a large number of cumbersome processes. The maintenance methods of dart rod, dart wing, soft dart tip and so on are mostly the same.darts
Soft dart tips are often bent, because they are relatively soft. You can pull them back by hand. It's best to replace them often. The tips of hard darts are not as easily bent as soft darts, but they can also occur in some cases. However, the hard dart tip will become blunt more often. At this time, you can use the sharpener or choose to use sandpaper. Just buy some fine sandpaper, lay it flat on the table, and then roll the dart tip back and forth on the sandpaper. Polish the dart needle regularly to keep it sharp, otherwise the barb of the dart tip will increase the damage of the target surface and reduce the service life of the dart target. When you don't use darts, please put them in a box or leather case. There are various boxes to choose from on the market, and the price varies according to the box.darts for sale
2、 Clean
You may often see that players will use some wax pens or similar things to increase the grip of darts and prevent them from slipping and falling off. One of the best ways to maintain the grip of darts is to keep them clean. For the new darts, the grip is very good, no problem. When you play for a few months or even less, the grip of darts is not so good, because the grease / fat on your fingers will affect the grip of darts.best darts online
The method of cleaning darts is very simple: find a container that can hold your dart barrel, add 20ml washing solution, fill it with warm water, and then let the dart barrel stay in the container for one night. After waking up in the morning, just take out the dart barrel, rinse it with clean water and wipe it dry.

dkeidneb123 發表在 痞客邦 留言(0) 人氣()

General beginners should use the standing position of sideways, throwing hands in front and facing the center of the dart board. After the dart line, the intersection angle between the forefoot and the dart can be selected between 0-90 °. Separate your legs, shoulder width apart, lean forward and press your center of gravity on your front legs; Keep your hind legs straight to the back of your body and your toes on the ground to keep your balance.steel tip darts
When throwing darts, all movements should be uniform, natural, coherent, smooth, complete and in place. They should be done at one go without adding force or pausing in the middle. At the same time, timely grasp the appropriate time of darting, and the darting route will be higher if it is too early and lower if it is too late. Throughout the throwing process, the movements of the forearm and hand should always be straight in a plane. Fixing the correct wrist movement is the key to throwing. The relaxation or tension of the wrist will affect the morning, evening and weight of the wrist movement; The wrist moves too early and too heavy, and the landing point is low, on the contrary, it will be high; The time when the dart leaves the hand and the strength of the finger also affect the falling point of the dart; If the dart is held too hard and the dart is released slowly, the dart will appear too late and the landing point will be low. On the contrary, it will be high. Uneven finger force will make the falling point of the dart deviate left and right. Generally, the hit rate is not high, which is often the reason for the problem. It is suggested that practitioners choose regular tungsten alloy darts when practicing darts, which can avoid some unnecessary problems. This kind of dart has heavy weight, good hand feel and good aerodynamic effect. It is the preferred dart for the daily training of dart experts. It is also a special dart for all kinds of regular competitions.Tungsten Darts
When throwing darts, in addition to the hand, wrist and forearm, other parts of the body, especially the eyes, must remain motionless. Its stability directly affects the hit rate. Concentrate on the dart throwing process, hold your breath at the moment of darting, prevent slight shaking of your hands, and maintain the consistency of all actions without intermission. Special attention should be paid here to keep other parts of the body motionless except the forearm, wrist and hand, otherwise the throwing quality will be affected. When throwing darts, pay special attention to the feeling of hands, wrists and forearms. Each time the feeling is the same as possible, so as to fix the throwing posture, stabilize the technical action and improve the consistency and hit rate of three darts.

dkeidneb123 發表在 痞客邦 留言(0) 人氣()

Preparation before throwing darts
Preparation posture: after throwing dart line, general beginners should use side body and throwing hand in front; Keep your legs apart, shoulder width apart, lean forward and press your center of gravity on your front legs (support legs); The hind legs (balance legs) are straight to the back of the body, and the toes are on the ground to keep the body balanced.
Face and front shoulder are facing the dart board, eyes are directly looking at the dart area, chest is raised, abdomen is closed, hips are raised, the front big arm is lifted up flush with the shoulder, the small arm is lifted naturally, and the elbow is facing the front, so that the shoulder, big arm, small arm and upper body form a plane perpendicular to the middle direction of the dart board as far as possible. The back arm droops naturally, the elbow bends slightly inward, and the backup dart is held at the waist. The back arm droops naturally, the elbow bends slightly inward, and the backup dart is held at the waist. The whole body is straight, stretch, relax and stable, and there is no unnatural or tense and rigid feeling in any part. Adjust breathing, stabilize mood and achieve a calm state. After long-term practice, you can determine the standing position in the middle, left or right behind the dart line and the appropriate angle between the front foot and the dart line according to your personal characteristics, actions and habits.Tungsten Darts
Dart throwing technique:
1. Stand steady. Some people can't help leaning forward or backward, but this posture is not as stable as standing upright.
2. Keep your feet firmly on the ground. When throwing darts, the body must maintain balance, otherwise, the hand will unconsciously exert tension or thrust on the darts, and the darts will deviate from the original direction.
3. Pay attention to the posture of holding darts. Put the dart in the palm of your dominant hand, and then weigh it to find the center of gravity of the dart. Press your thumb at the back of the center of gravity, and then hold the dart with two or four fingers. How many fingers you use depends on your dart holding habit.
4. The head of the dart should be tilted up a little, and then move back and forth as straight as possible. Any other superfluous action will only deflect the dart.
5. Throw darts gently. Throwing darts can't be too hard. It's not necessary and dangerous. In fact, the force required to insert a dart into the dart board is very small, so you don't have to use too much force. The purpose of dart game is to calculate the score, not to compare who has the greatest strength.steel tip darts

dkeidneb123 發表在 痞客邦 留言(0) 人氣()

1 2 3 4
Blog Stats
⚠️

成人內容提醒

本部落格內容僅限年滿十八歲者瀏覽。
若您未滿十八歲,請立即離開。

已滿十八歲者,亦請勿將內容提供給未成年人士。